# Tellor Docs

## Tellor Docs

- [Introduction](https://docs.tellor.io/tellor/readme.md): Overview
- [Whitepaper](https://docs.tellor.io/tellor/whitepaper.md): Last Edited: 11 Aug 2026
- [Bridging TRB](https://docs.tellor.io/tellor/bridging-trb.md): Lock your TRB on Ethereum, receive funds on tellor
- [TRBBridge Contracts Reference](https://docs.tellor.io/tellor/bridging-trb/trbbridge-contracts-reference.md): Record of Contract Addresses
- [Etherscan Method (Deposits)](https://docs.tellor.io/tellor/bridging-trb/etherscan-method-deposits.md): How to use Etherscan to "manually" bridge TRB to Tellor Layer.
- [Request a Withdrawal via CLI](https://docs.tellor.io/tellor/bridging-trb/request-a-withdrawal-via-cli.md): How to use Etherscan to "manually" bridge TRB back to Ethereum.
- [Manual Generation of Bridge Query Data / IDs](https://docs.tellor.io/tellor/bridging-trb/manual-generation-of-bridge-query-data-ids.md): Just in case
- [Contracts Reference](https://docs.tellor.io/tellor/using-tellor-data/databridge-contracts-reference.md): Record of EVM contracts for Tellor by network
- [Relay Data to EVM Chains](https://docs.tellor.io/tellor/using-tellor-data/relay-data-to-evm-chains.md): Relay oracle data, validator set, and bridge information updates back and forth between tellor and any EVM chain.
- [Integrating Tellor Data](https://docs.tellor.io/tellor/using-tellor-data/integrating-tellor-data.md): Safely integrate tellor oracle data into your contracts
- [Integrate Tellor on a New Chain](https://docs.tellor.io/tellor/using-tellor-data/integrate-tellor-on-a-new-chain.md): Follow these steps to provide tellor data on a new evm chain
- [Pull Oracle](https://docs.tellor.io/tellor/using-tellor-data/pull-oracle.md): A pull implementation for Tellor users
- [Getting Started (testnet)](https://docs.tellor.io/tellor/running-palmito-testnet/public-testnet.md): Instructions and guides for using tellor.
- [Node Quick Start (testnet)](https://docs.tellor.io/tellor/running-palmito-testnet/node-quick-start-testnet.md): Use the guided setup shell scripts!
- [Quick Start New (faster!)](https://docs.tellor.io/tellor/running-palmito-testnet/quick-start-new-faster.md): Using the Tellor layer node installation script!
- [Managing Accounts](https://docs.tellor.io/tellor/running-palmito-testnet/manage-accounts.md): Follow the steps to make a layer account that can be used to receive funds from the bridge for transacting on Tellor.
- [Node Setup Manual (testnet)](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup.md): How to Operate Tellor Layer Node.
- [Peers List & Public RPCs](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/peers-list-and-public-rpcs.md): The following peers list can be used for syncing \`layertest-5\`
- [Cosmovisor Sync](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/cosmovisor-sync.md): Setup steps for cosmovisor gang.
- [Binary Upgrades](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/binary-upgrades.md): Example commands for upgrading the layerd binary.
- [State Sync Troubleshooting / Resetting Chain Data](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/state-sync.md): Steps for resetting / re-syncing a state synced node (or recovering from a failed state sync).
- [Example .service Files](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/example-.service-files.md): Templates for systemd service files that work with Tellor
- [Run a Layer Validator (testnet)](https://docs.tellor.io/tellor/running-palmito-testnet/run-a-layer-validator.md): Follow the steps to become a Tellor testnet validator.
- [Slashing Rules for Validators](https://docs.tellor.io/tellor/running-palmito-testnet/run-a-layer-validator/jailing-and-unjail-ing.md): Slashing, jailing, and how to unjail your validator.
- [Run a Data Reporter (testnet)](https://docs.tellor.io/tellor/running-palmito-testnet/run-the-data-reporter.md): Operate a Data Reporter!
- [Updating reporterd](https://docs.tellor.io/tellor/running-palmito-testnet/run-the-data-reporter/updating-reporterd.md): Steps for updating your reporter daemon.
- [Unjail Your Reporter](https://docs.tellor.io/tellor/running-palmito-testnet/run-the-data-reporter/unjail-your-reporter.md): Example command to unjail your reporter:
- [Switch Reporter or Selector](https://docs.tellor.io/tellor/running-palmito-testnet/run-the-data-reporter/switch-reporter-or-selector.md): Steps for changing your reporter selection.
- [Withdraw TRB (to Sepolia)](https://docs.tellor.io/tellor/running-palmito-testnet/bridge-back-to-sepolia.md): How to get your funds back to Ethereum
- [Withdraw Using CLI](https://docs.tellor.io/tellor/running-palmito-testnet/bridge-back-to-sepolia/withdraw-using-cli.md): Exit tellor permissionlessly even if the front-end is down.
- [Getting Started](https://docs.tellor.io/tellor/running-tellor/getting_started.md): Instructions and guides for using tellor.
- [Managing Accounts](https://docs.tellor.io/tellor/running-tellor/manage-accounts.md): Follow the steps to make and manage your \`tellor\` account.
- [Node Setup Quick Start](https://docs.tellor.io/tellor/running-tellor/node-setup-quick-start.md): Use the guided setup shell scripts!
- [Node Setup Manual](https://docs.tellor.io/tellor/running-tellor/node-setup.md): How to Operate Tellor Node.
- [Peers List & Public RPCs](https://docs.tellor.io/tellor/running-tellor/node-setup/peers-list-and-public-rpcs.md): The following peers list can be used for syncing tellor mainnet
- [Cosmovisor Sync](https://docs.tellor.io/tellor/running-tellor/node-setup/cosmovisor-sync.md): Cosmovisor is a binary manager that can perform upgrades automatically.
- [Binary Upgrades](https://docs.tellor.io/tellor/running-tellor/node-setup/binary-upgrades.md): Example commands for upgrading the layerd binary.
- [State Sync Troubleshooting / Resetting Chain Data](https://docs.tellor.io/tellor/running-tellor/node-setup/state-sync.md): Steps for resetting / re-syncing a state synced node (or recovering from a failed state sync).
- [Example .service Files](https://docs.tellor.io/tellor/running-tellor/node-setup/example-.service-files.md): Templates for systemd service files that work with Tellor
- [Run a Tellor Validator](https://docs.tellor.io/tellor/running-tellor/run-a-layer-validator.md): Follow the steps to become a tellor validator.
- [Slashing Rules for Validators](https://docs.tellor.io/tellor/running-tellor/run-a-layer-validator/jailing-and-unjail-ing.md)
- [Run a Data Reporter](https://docs.tellor.io/tellor/running-tellor/run-the-data-reporter.md): Operate a Data Reporter!
- [Updating reporterd](https://docs.tellor.io/tellor/running-tellor/run-the-data-reporter/updating-reporterd.md): Steps for updating your reporter daemon.
- [Unjail Your Reporter](https://docs.tellor.io/tellor/running-tellor/run-the-data-reporter/unjail-your-reporter.md): Example command to unjail your reporter:
- [Switch Reporter or Selector](https://docs.tellor.io/tellor/running-tellor/run-the-data-reporter/switch-reporter-or-selector.md): Steps for changing your reporter selection.
- [Production Spot Price List](https://docs.tellor.io/tellor/running-tellor/run-the-data-reporter/production-spot-price-list.md): A list of used spot price feeds.
- [Disputes and Reporter Governance](https://docs.tellor.io/tellor/running-tellor/disputes-and-reporter-governance.md): cli commands and additional context for understanding Tellor reporter slashing and dispute governance
- [Leveraging layerd](https://docs.tellor.io/tellor/command-line-usage/leveraging-layerd.md): Commands for interacting with Tellor using the command line interface.
- [Query the Chain](https://docs.tellor.io/tellor/command-line-usage/leveraging-layerd/query-the-chain.md): Use the cli to query Tellor for information about accounts, validators, reports, disputes, governance and more.
- [Creating Transactions](https://docs.tellor.io/tellor/command-line-usage/leveraging-layerd/creating-transactions.md): Use the cli to create Tellor transactions.
- [Delegate to a Validator](https://docs.tellor.io/tellor/command-line-usage/leveraging-layerd/delegate-to-a-validator.md)
- [Select a Reporter](https://docs.tellor.io/tellor/command-line-usage/leveraging-layerd/select-a-reporter.md)
- [Setting up a Grafana Dashboard for your Layer Node](https://docs.tellor.io/tellor/setting-up-a-grafana-dashboard-for-your-layer-node.md): The goal of this guide is to help other node operators set up a grafana dashboard that monitors things in Layer such as average gas price for submitting a report, block times, total bonded tokens, and