> For the complete documentation index, see [llms.txt](https://docs.tellor.io/tellor/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/binary-upgrades.md).

# Binary Upgrades

Example commands for upgrading the layerd binary.

Use these steps when Palmito reaches a planned chain upgrade and your node stops at the upgrade height.

There are two upgrade paths depending on how you run your node:

* **Cosmovisor** — Download the new binary and register it with cosmovisor before the upgrade height. Cosmovisor swaps binaries and restarts the node automatically. See [Upgrading with Cosmovisor](#upgrading-with-cosmovisor) below.
* **Manual or systemd** — Download the new binary, optionally install it to your PATH, and restart the node yourself. Follow sections 1–3 below.

If you have not set up cosmovisor yet, see [Cosmovisor Sync](/tellor/running-palmito-testnet/node-setup/cosmovisor-sync.md).

## 1. Download the new binary

The new `layerd` binary version is `v6.1.8`. Choose the command for your machine:

{% tabs %}
{% tab title="Linux" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries && cd ~/layer/binaries && mkdir v6.1.8 && cd v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Linux_x86_64.tar.gz && tar -xvzf layer_Linux_x86_64.tar.gz
```

{% endcode %}
{% endtab %}

{% tab title="Linux ARM64" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries && cd ~/layer/binaries && mkdir v6.1.8 && cd v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Linux_arm64.tar.gz && tar -xvzf layer_Linux_arm64.tar.gz
```

{% endcode %}
{% endtab %}

{% tab title="MacOS" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries && cd ~/layer/binaries && mkdir v6.1.8 && cd v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Darwin_arm64.tar.gz && tar -xvzf layer_Darwin_arm64.tar.gz
```

{% endcode %}
{% endtab %}
{% endtabs %}

Confirm the version:

```sh
~/layer/binaries/v6.1.8/layerd version
```

## 2. (optional) Install it in `~/go/bin/layerd`

Copy the new binary into `~/go/bin`:

```sh
mkdir -p ~/go/bin
cp ~/layer/binaries/v6.1.8/layerd ~/go/bin/layerd
chmod +x ~/go/bin/layerd
```

Make sure `~/go/bin` is in your shell `PATH` so new terminal sessions can find `layerd`. Edit with nano or use the commands below to add `export PATH="$HOME/go/bin:$PATH"` in your `.bashrc` or `.zshrc`

{% tabs %}
{% tab title="bash" %}

```sh
echo 'export PATH="$HOME/go/bin:$PATH"' >> ~/.bashrc
source ~/.bashrc
```

{% endtab %}

{% tab title="zsh" %}

```sh
echo 'export PATH="$HOME/go/bin:$PATH"' >> ~/.zshrc
source ~/.zshrc
```

{% endtab %}
{% endtabs %}

Check that your shell is using the new binary:

```sh
which layerd
layerd version
```

## 3. Restart at the upgrade height

The node will stop and wait for the upgraded binary when the upgrade height is reached. When this happens, stop your node process. If you start the node manually, restart it with the new binary:

{% code overflow="wrap" %}

```sh
~/layer/binaries/v6.1.8/layerd start --home ~/.layer --key-name ACCOUNT_NAME --keyring-backend test --api.enable --api.swagger
```

{% endcode %}

If you run your node with systemd, update the `ExecStart` line in your `.service` file to point at the new binary. Use an absolute path instead of `~`:

{% code overflow="wrap" %}

```sh
ExecStart=/home/USERNAME/layer/binaries/v6.1.8/layerd start --home /home/USERNAME/.layer --keyring-backend="test" --key-name=ACCOUNT_NAME --api.enable --api.swagger
```

{% endcode %}

Then reload systemd and restart your service:

```sh
sudo systemctl daemon-reload
sudo systemctl restart layerd
sudo journalctl -u layerd -f
```

Replace `layerd` with the actual name of your service if it is different.

{% hint style="info" %}
Keep the old versioned binary directory until you are sure the node is running correctly after the upgrade.
{% endhint %}

## Upgrading with Cosmovisor

If you run your node with cosmovisor (see [Cosmovisor Sync](/tellor/running-palmito-testnet/node-setup/cosmovisor-sync.md)), register the new binary before the upgrade height. Cosmovisor handles the swap and restart automatically — you do not need to update systemd or restart the process yourself.

The new `layerd` binary version is `v6.1.8`. Choose the command for your machine:

{% tabs %}
{% tab title="Linux" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries/v6.1.8 && cd ~/layer/binaries/v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Linux_x86_64.tar.gz && tar -xvzf layer_Linux_x86_64.tar.gz
```

{% endcode %}
{% endtab %}

{% tab title="Linux ARM64" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries/v6.1.8 && cd ~/layer/binaries/v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Linux_arm64.tar.gz && tar -xvzf layer_Linux_arm64.tar.gz
```

{% endcode %}
{% endtab %}

{% tab title="MacOS" %}
{% code overflow="wrap" %}

```sh
mkdir -p ~/layer/binaries/v6.1.8 && cd ~/layer/binaries/v6.1.8 && wget https://github.com/tellor-io/layer/releases/download/v6.1.8/layer_Darwin_arm64.tar.gz && tar -xvzf layer_Darwin_arm64.tar.gz
```

{% endcode %}
{% endtab %}
{% endtabs %}

Confirm the version:

```sh
~/layer/binaries/v6.1.8/layerd version
```

Then register the upgrade with cosmovisor:

```sh
./cosmovisor add-upgrade v6.1.8 ~/layer/binaries/v6.1.8/layerd
```

{% hint style="info" %}
Run `add-upgrade` before the chain reaches the upgrade height. Keep the old versioned binary directory until you are sure the node is running correctly after the upgrade.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.tellor.io/tellor/running-palmito-testnet/node-setup/binary-upgrades.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.